Categorías

P-Star 25K50 Micro

$600.00 MXN (IVA Incluido)

2 disponibles

Código De Producto: 3150

El P-Star 25K50 Micro es un módulo programable pequeño con en microcontrolador Microchip PIC18F25K5. Este paquete maneja una interfaz Micro-USB y 16 pines I/O digitales sobre una placa que mide sólo 1″×0.6″, los montajes vienen precargados con un cargador de arranque USB, por lo que no se requiere programador externo.

Localización:D6

Información adicional

Fabricante

Pololu

Descuento

5 o más $570.00
10 o más $540.00

SKU 3150 Categorías , Etiqueta

2 disponibles

Descripción:

The Pololu P-Star 25K50 Micro is a general-purpose programmable module based on Microchip’s PIC18F25K50 microcontroller, which has 32 KB of flash program memory, 2 KB of RAM, and built-in USB functionality. Onboard features of the P-Star (abbreviated P*) include a 16 MHz crystal, a USB Micro-B connector, and three user-controllable indicator LEDs. A voltage regulator and power selection circuit allow the board to be powered from either USB or an external 5.5 V to 15 V source, while a resettable PTC fuse on the USB VBUS supply and reverse protection on VIN help protect it from accidental damage. The board ships with a USB bootloader that makes it easy to program the PIC microcontroller without using an external programmer.

Our comprehensive user’s guide provides the basics you need to get started with the P-Star 25K50 Micro as well as detailed technical information.

This product requires a USB A to Micro-B cable (not included) to connect to a computer.

P-Star 25K50 Micro, bottom view.

P-Star 25K50 Micro, top view.

Features

  • Dimensions: 1″ × 0.6″ (1.05″ × 0.6″ including USB Micro-B connector)
  • Programmable Microchip PIC18F25K50 microcontroller
    • 32 KB flash (8 KB used by bootloader, leaving 24 KB available for user program by default)
    • 2 KB SRAM
    • 256 bytes of EEPROM
    • Native full-speed USB (12 Mbps)
  • 5 V logic voltage
  • Internally clocked at 48 MHz, resulting in execution speeds up to 12 million instructions per second (MIPS)
  • Precision 16 MHz crystal
  • Many I/O lines in a small package
    • 16 user I/O lines along the sides of the board
    • 3 additional I/O pins available in other locations
    • 13 pins can be configured as analog inputs
    • 2 PWM output signals (one of which can be sent to four different pins)
    • 5-bit digital-to-analog converter (DAC) output
  • Three user-controllable LEDs
  • USB Micro-B connector
  • Can be powered from USB or external source regulated to 5 V by onboard regulator
  • Operating voltage: 5.5 V to 15 V
    • Can operate down to 3.8 V with decreased logic voltage
  • Reverse-voltage protection on external power input
  • PTC fuse on VBUS supply
  • Ships with a proprietary USB bootloader developed by Pololu for the P-Star
  • Bootloader is usable from Windows, Linux, and Mac OS X with open source software
  • No external programmer required
  • Compatible with standard Microchip compilers, development tools, and programmers
  • Comprehensive user’s guide

Pinout

P-Star 25K50 Micro pinout diagram.

This diagram identifies the I/O and power pins on the P-Star 25K50 Micro. The diagram is also available as a printable PDF(161k pdf). For more information about the PIC18F25K50 microcontroller and its peripherals, see Microchip’s PIC18F25K50 documentation.

Included hardware

Two 1×10-pin breakaway 0.1″ male headers and one 1×6-pin breakaway 0.1″ male header are included with the P-Star 25K50 Micro. These header pins can be soldered in to use the board with perfboards, breadboards, or 0.1″ female connectors.

P-Star 25K50 Micro with included optional headers.
 
The P-Star 25K50 Micro with soldered headers and connected USB cable.
Carrito
Nuevos productos
Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors
Abrir chat
Hola 👋
¿En qué podemos ayudarte?